CALogix - Temperature/process controller with logic capability

•DIN Rail Mount base unit
•PID and Logic I/O control modules
•Base-unit for up to 4 control modules
•Flexibility to meet application requirements
•Alarms
•PID heat-cool
•Network up to 31 base units
•RS485 Modbus RTU
•3 Year warranty

CALogix is a modular system that consists of a DIN-rail mounted base unit and up to 4 control modules. PID and logic modules can be added to the base unit in any configuration ensuring the exact requirements of your application can be met. CALogix is sub panel mounted which means that CALogix can be easily integrated within a system that has a central user interface. This could be an operator panel or a PC running an OPC based SCADA system or your own custom software.

CALogix-sw is a software configuration tool that allows simple setting of the controllers. A graphical interface gives current process value and set-point data for each PID module. Structured drop down menus provide a simple platform for configuring all functions within the controller. Logic programming can be created to integrate with PID control. Timers, counters, Boolean and comparator function blocks are used to link inputs, outputs and PID for enhanced system control.

CALogix provides cost-effective multi-loop control in many applications including plastics machines, automated control systems, analytical systems, environmental chambers, ovens, kilns, furnaces, packaging equipment and many other temperature and process control applications.

PID Control

•PID Auto-tune
•Programmable profiles (Up to 31 profiles, max. 126 segments per control module)
•Temperature sensor (B,E,J,K,L,N,R,S,T) or analogue inputs (0-50mV, 4-20mA, 0-5V, 0-10V)
•Relay, SSD or analogue outputs (4-20mA, 0-5V, 0-10V)

Logic Control

•Function block programming
•Integrate logic with PID
•Boolean, Timer, Counter and Comparator functions
•Logic I/O module inputs, 0-5V, 0-10V or 0-24V user selectable
•Logic I/O module outputs relay,

Specification - CALogix
Thermocouple types:
9 types:	B,E,J,K,L,N,R,S,T
Standards:	IEC 584-1
CJC rejection:	30:1 typical
External resistance:	100 ohms maximum
Resistance Thermometer	2 or 3 wire
Standards	IEC 751 (100ohms 0°C/138.5ohms 100°C Pt)
Bulb Current	0.2mA maximum
Linear Process Inputs
Linear Input	Typical Accuracy	Range
0-50mV	+/- 0.1%	+/- 0.00 - 99.99, +/- 100.00 - 499.95, +/- 500.00 - 999.99, +/- 1000.00 - 9999.99
4-20mA	+/- 0.1%	As above
0-5V	+/- 0.1%	As above
0-10V	+/- 0.1%	As above
Applicable to all inputs	(SM = Sensor maximum)
Calibration Accuracy	+/- 0.1% FS typical +/- 1°C
Sampling Frequency	Input 10Hz, CJC 4sec
Common mode rejection	Negligible effect up to 140dB, 240, 40-60Hz
Temperature coefficient	50ppm/°C SM typical
Output devices
Solid state relay driver: SSd1 and SSd2	12Vdc +10/-15% 20mA
Miniature power relay: Rly1, Rly2, Rly3	2A/250ac resistive load, form A/SPST
Analogue Output	4-20mA 500ohms max +/- 0.1% fs typical 0-5Vdc 10mA 500ohms max +/- 0.1% fs typical 0-10Vdc 10mA 1Kohms max +/- 0.1% fs typical
Logic I/O Module specifications
Input Range	0-5/0-10/0-24VDC s/w select
Outputs SSd1 and SSd2 Rly1, Rly2, Rly3	12Vdc +10/-15% 20mA 2A/250ac resistive load, form A/SPST
Maximum counter input frequency	1 fast 1KHz, Other 10Hz
Environmental
Safety	EN61010, UL873, CSA22.2 No 1010-1
Installation	Categories I and II
Pollution	Degree II
EMC Emission	EN61000-6-3
EMC Immunity	EN6100-6-2
Mouldings	Flame retardant polycarbonate
Supply
Supply Voltage	18 - 30 VDC 7watts +/-10% fluctuation allowed

For a download of the manual click here

For Operator Panels click here