Features of the 9500P programmable process controller.
• Full PID auto-tuning process controller
• Total of 3 outputs, from 4-20mA, 0-5v, 0-10v, SSR drive, relay
• Input options:
Thermocouple
2 or 3 wire PT100
0-50mV, 0-5V, 0-10V, 0-20mA, 4-20mA
• Alarms with 5 options
• Heat-cool operation
• Programmer operation
• Sleeve mounting for easy maintenance
• IP66 protection from front panel
• CE, UL & CSA approvals
• 3-year warranty
• Monitoring and configuration software option
• RS232/485 options, Modbus RTU protocol
Programmer Features
• Up to 31 programs (profiles)
• Up to 126 segments
• Unlimited use of event outputs via the 2nd and 3rd outputs
• Copy/paste/edit/delete functions to simplify program building
• Call another program as a sub-program segment
• Up to 999 program loop cycles, or continuous loop cycling
• Hold back function to ensure the next segment is not started until
the last
segment reaches set-point
• 3 power fail recovery options, (hold, continue or reset)
• Front Panel Interrogation of the program position
• Memory usage indication during programming
Front panel 'release from hold' function to run the program.
Specification - 9500P |
|
|
|
Thermocouple types: |
|
9 types: |
B,E,J,K,L,N,R,S,T |
Standards: |
IPTS/68/ DIN 43710 |
CJC rejection: |
20:1 (0.05°/°C) typical |
External resistance: |
100 ohms maximum |
|
|
Other input options: |
0 to 50mV +/-0.1% |
4-20mA +/-0.1% |
|
|
0-5V +/-0.1% |
|
0-10V +/-0.1% |
|
|
Applicable to all inputs (SM = sensor maximum) |
|
Calibration accuracy: |
+/- 0.25% SM +/-1°C |
Sampling frequency: |
input 10Hz, CJC 2 sec. |
Common mode rejection: |
Negligible effect up to 140db, 240V, 50-60Hz |
Series mode rejection: |
60db, 50-60Hz |
Temperature coefficient: |
50ppm/°C SM typical |
Reference conditions: |
22°C +/- 2°C, rated voltage after 15 minutes settling time. |
|
|
Output devices (check configuration) |
|
| SSd1 and SSd2 |
solid state relay driver: to switch a remote SSR 6VDC (nominal) 20mA non-isolated |
Miniature power relay: |
form A/SPST contacts (AgCdO) |
rLY1, rLY2, rLT3: |
2A/250VAC resistive load |
Analogue output: |
4-20mA 500 ohms max’ +/- 0.1% fs typical |
|
0-5Vdc 10mA (500 ohms min’) +/- 0.1% fs typical |
|
0-10Vdc 10mA (1K ohms min’) +/- 0.1% fs typical |
|
|
General: |
|
| Displays: |
Upper, 4 digits, high brightness green LED 10.4mm (0.4") high. |
|
Lower, 4 digits, high brightness orange LED 9mm (0.35") high. |
|
Digital range –199 to 9999 |
|
Hi-res mode –199 to 999.9 |
|
LED output indicators – |
|
flashing SP1 square, green; SP2/SP3 round, red. |
| Keypad: |
3 elastomeric buttons. |
Power Supply: |
100-240V AC, 50-60 Hz , (typ' 5.0 VA) |
For a download of the manual click here
UK tel: +44 (0)1273 606271 USA tel: 800 866 6659 |
||
 |
||
